Used Lång bänk 280x120x95cm #10845

Long bench 280x120x95cm #10845

Long bench with base cabinet

Length: 280cm

Width:120cm

Height: 95cm


Used Press för papp/well Orwak Compactor 3115 #2872

Press for cardboard/waste Orwak Compactor 3115 #2872

Orwak Compactor 3115 that has received a new handle.

Perfect machine for corrugated cardboard or plastic

Functioning as it should


Press force: 6 ton (60 kN).

Input opening: 800 mm wide and 460 mm high.

Cycle time: 33 seconds.

Balvikt: Up to 60 kg for corrugated cardboard and up to 85 kg for soft plastic.


Bale size (Finished bale): 800 x 600 x 600 mm (balhöjden can be adjusted in three different sizes)



More information can be found there:

https://ats-orwak.se/wp-content/uploads/2021/09/Orwak-Compact-3115_en.pdf

Used Press Bramidan 4-x 16 #2880

Press Bramidan 4-x 16 #2880

A Bramidan 4-x 16 that operates without issues.


Press force: 16 ton

Dimensions (W×D×H): Approx. 1715 x 1290 x 1995 mm

Machine weight: Approximately 1260–1410 kg

Inlet opening: 1090 x 510–530 mm

Tray size (W×D×H): About 1200 x 800 x 800 mm

Balvikt: 200–250 kg (depending on material)


Used Press Bramidan 4-x 30 #2879

Press Bramidan 4-x 30 #2879

Button for corrugated cardboard or plastic.

Works as it should


Press force:30 ton

Dimensions (W×D×H): Approximately 1760 x 1255 x 2295 mm

Machine weight: About 1710 kg

Inlet opening: 1090 x 655 mm

Balancer size (W×D×H): About 1200 x 800 x 1000 mm

Balvikt:275–350 kg for carton / 325–425 kg for soft plastic


Used Press Bramidan 4-x 30 #2881

Press Bramidan 4-x 30 #2881

Press from Bramidan for example plastic or corrugated cardboard.


Press force:30 ton

Dimensions (BxDxH): Approximately 1760 x 1255 x 2295 mm

Machine weight: Approximately 1710 kg

Inlet opening: 1090 x 655 mm

Tray size (W×D×H): Approximately 1200 x 800 x 1000 mm

Balvikt:275–350 kg for carton / 325–425 kg for soft plastic

Used Kompressor Clean air CLR 15/30 ST #2947

Compressor Clean air CLR 15/30 ST #2947

Fully functional with no issues


CleanAir CLR 15/30 ST is a professional oil-free piston compressor (often marketed under brands within the Atlas Copco group such as ABAC, Mark or Ceccato). It is specifically designed for operations requiring 100% sterile, clean and dry compressed air, for example dental clinics (usually sufficient for 1–2 dental chairs), medical laboratories and the food industry.


Power output: 1.5 hp (1.1 kW)

Tank volume: 30 liters (internally epoxy-coated to prevent rust and bacterial growth)

Max operating pressure: 8 bar

Magnified volume / Capacity: About 240 liters per minute

Sound level: Very quiet thanks to the insonorated hood (around 63–74 dB(A) depending on measurement method/placement).

Weight: About 68–75 kg

Adsorption tower & Cyclone separator: Dries the air extremely effectively (pressure dew point down to -40 °C), which eliminates the risk of condensate water and bacterial growth in the air system.


Brushes are here (PDF):

https://www.abacaircompressors.com/content/dam/brands/ABAC/products/piston-compressors/piston-compressors-direct-drive/dental/leaflets/cleanAIR_CLR%2015-25_leaflet_EN_6999109970.pdf

Other Bord 300x138x902 #10848

Table 300x138x902 #10848

Large table with drainage toward the middle of the table

Length: 300cm

Width: 138cm

Height: 90cm

Other Bänk 200x65x88cm #10852

Workbench 200x65x88cm #10852

Bench

Length: 200cm

Width: 65cm

Height: 88cm


Other Bord 121x81x66cm #10858

Table 121x81x66cm #10858

A sturdy table with the dimensions


Length: 121cm

Width: 81cm

Height: 66cm