Used Mörare Rewebo SG #2994

Meat tenderizer Rewebo SG #2994

New contact


Other information:

Rewebo SG probably from 1990

Quiet-running and operates without any issues

Construction: The machine has a heavy chassis cast in aluminum

Connection: 230V

Weight: about 18kg

Input opening: approximately 17.5 × 2.5 cm.

Size: approx. 37 x 24 x 37.5 cm (L x W x H).

Important: During cleaning note the colors on the rollers when they are removed from the machine!



Contact us for more information



Used Fiskfjällare KT-S #2993

Fish Scaler KT-S #2993

Fully functional


The hake is an excellent aid for anyone who works with fish.

The fish is gutted quickly and efficiently with a very good result.

The top nut is easy to work with and has waterproof ball bearings.

The machine's outer surfaces are made of stainless steel and the motor is protected against water through effective insulation.

The fish scaler is connected to a standard grounded electrical outlet.


Other information:

Power output: 0.12 kW (1-phase, 230 V, 50 Hz).

RPM: 1360 rpm.

External dimensions (motor unit): Width 190 mm, depth 240 mm, height 230 mm.

Weight: Approximately 10 kg


Standing on the workbench: The machine is equipped with sturdy rubber feet on the underside and a carrying handle on the top. This allows it to stand stably on a benchtop and be easily moved aside during cleaning or when not in use.

Wall mounting: On the back of the motor unit there are keyhole mounts (hanging hooks) so you can hang it directly on the wall. This is often recommended in fish shops and preparation kitchens as it frees up bench space and keeps the motor away from water spray and fish remnants on the table.


Manual can be found here:

https://www.autofishscalers.com/KTS_Images/KT-S-Operators-Manual.pdf



Contact us for more information



Used Vakuummaskin  KOMET Perfect  #2957

Vacuum machine KOMET Perfect #2957

Actions:

Shaft, vacuum valve.

Mount, air silencing damper.

New start button.

New LED segment on panel.

New oil+filter.

New grinding tape.

 

Other information:

Vac value 7.

Tested, no faults.


Since the label for the machine is missing "believe" we it is a Komet S 501 from information on the internet. The closest information about Komet S 501 found is here (PDF)

https://www.vakuumverpacken.de/wp-content/uploads/2021/09/komet-datasheet-s501.pdf


Want to know more contact us.



Other Sulrengöringsmaskin #2992

Sole cleaning machine #2992

Functioning as it should


Other information:


Name: Sole cleaning machine (soles cleaning machine for hygienic and food industry).

Installation: wall-mounted

Model/Type (TYPE): 23822.

Year of manufacture (YEAR): July 2011 (07/2011).

Voltage: 400 V 3/PE (three-phase alternating current with protective earth, without neutral conductor).

Frequency: 50 Hz.

Power: 0.25 kW (250 watt).

You can find the brochure here:

https://www.itec-hygiene.com/media/5647/itec-frontmatec-hygienestation-solo-traditio-complete-type-23822_en.pdf


Used Kokgryta Jøni Easy 60/70L  #2989

Kettle pot Jøni Easy 60/70L #2989

New overheat protection.

Cable, main switch.

"Jøni Easy 60/70L (model year 2009) is a Danish-made, electrically heated and steam-insulated large kitchen kettle with a 60-liter capacity (70 liters gross volume) equipped with the analog and reliable control panel AutoTemp 02e and electric tilting."

Other information:

Manufacturer and model: Danish Jøni A/S (often written Jöni in Sweden or Joni Foodline on the panel), model Easy 60/70L from 2009.

Capacity and construction: Net volume of 60 liters (70 liters to the rim) in acid-resistant, stainless steel without welds. Fully welded and insulated kettle body with unheated top edge for safe handling.

Heating: Built-in electric steam generator (normally 15 kW, 3×400V) with automatic water refilling and maximum operating pressure of 1.0 bar (around 120 °C).

Control panel (AutoTemp 02e): Simple and robust control without digital displays. Consists of a stepless temperature knob (0–10), a spring-return rotary control for electric tipping, and three indicator lamps (green for heat, yellow for water level, and red for fault/overheating).

Delivery and service life: A heavy industrial machine built for long life, where simple electronics are a major advantage during service and maintenance compared with more advanced digital models.



Contact us for more information


Used Kvarn Dadaux TX98 DC AVEC SECU #2991

Grinder Dadaux TX98 DC AVEC SECU #2991

Fully functional mill in top condition.

Mounted contact.


"Dadaux TX98 DC WITH GUARD is a powerful benchtop model of professional meat grinder in stainless steel equipped with double grinding set and safety hood. The machine is manufactured in France by Dadaux SAS and is built for high capacity in charcuterie, slaughterhouses and catering."


Other information:

TX98: Specifies the outlet diameter of the cyclone/hammer mill? Wait. Actually 'Anger kvarnhusets utloppsdiameter på 98 mm.' translates to 'Indicates the outlet diameter of the grain mill's? 'kvarnhus' is

DC (Double Coupe): Indicates that the grinder uses the Unger 2-system (two-cut set with pre-cut, double-sided blade and hole plate) for an extra fine and uniform grind in a single step.

WITH SECURITY: Indicates that the machine is equipped with a foldable protective cover in front of the outlet with an integrated safety switch that stops the motor if the cover is opened

Construction: Fully made of stainless steel (AISI 18/10), including motor housing, hopper housing, feed screw and locknut.

Tray volume: Feeding trough of about 15 liters

Weight: Approximately 70 kg

Connection: 16A


You can find the brochure here (PDF):

https://dadaux.com/new_site/wp-content/uploads/Documentation-technique-TX98-AVEC-CAPOT.pdf



Contact us for more information





Used Kvarn Dadaux TX98 DC AVEC SECU #2990

Grinder Dadaux TX98 DC AVEC SECU #2990

Fully functional mill in top condition.

Mounted contact.


"Dadaux TX98 DC WITH GUARD is a powerful benchtop model of professional meat grinder in stainless steel equipped with double grinding set and safety hood. The machine is manufactured in France by Dadaux SAS and is built for high capacity in charcuterie, slaughterhouses and catering."


Other information:

TX98: State the discharge diameter of the gantry mill's outlet at 98 mm.

DC (Double Coupe): Indicates that the grinder uses the Unger 2-system (two-cut set with pre-cut, double-sided blade and hole plate) for an extra fine and uniform grind in a single step.

WITH SECU: Involves the machine being equipped with a foldable protective cover in front of the outlet with an integrated safety switch that stops the motor if the cover opens

Construction: Fully made of stainless steel (AISI 18/10), including motor housing, hopper housing, feed screw and locknut.

Tray volume: Feeding trough of about 15 liters

Weight. Approximately 70 kg

Connection: 16A


You can find the brochure here (PDF):

https://dadaux.com/new_site/wp-content/uploads/Documentation-technique-TX98-AVEC-CAPOT.pdf


Contact us for more information




Used Wexiö kvarn B98 #2987

Wexiö Grinder B98 #2987

New actuator box with switch and zero-voltage release.

Crack in the gearbox housing that is welded and new wedge

Painted stand

Runs quietly and smoothly!


The capacity of a Wexiö B98 meat mincer under normal operating conditions is between 600 kg and 1,000 kg ground meat per hour. Wexiö's direct-driven design is known to be largely wear-free.

Other information:

Unger B98 system

Holding diameter: The remaining discs have an outer diameter of 98 mm

The machine is directly driven with a gear reducer


Contact us for more information




Used Kvarn BM CN-106 #2988

Grinder BM CN-106 #2988

2pcs new packing boxes

1st complete electrical box

1st circuit breaker

1st protective grille, glove protection

1st new handle for millhouse


"Industrial meat grinder Bankeryd's Machine BM CN-106 – Swedish quality machineReliable floor-standing Model CN-106 (also called C-106). A classic Swedish workhorse built to last for generations, perfect for farm shop, game meat processing, butcher shop, slaughterhouse, or larger restaurant kitchens."


Other information:

Disc diameter: 106 mm

Kvarnsystem: Unger C 106

Capacity: Approximately 270–300 kg of meat per hour.

Material in the grinding house: Durable cast iron.

Power connection: 3-phase, 16A


Contact us for more information



Used WEBER SA770 Skinner #2986

WEBER SA770 Skinner #2986

Two adjustments and sharpening.

A bit worn but runs quietly and smoothly.


A reliable and fully automatic deshelling machine from the German quality brand Weber, model AS 770. The machine was manufactured in 2003 and is known in the industry for its extremely robust construction, high capacity, and easy maintenance.


Other information:

Cutting width: 770 mm

Motor power: 1.5 kW


Contact us for more information


Used Kvarn KT-130 på stativ #2905

KT-130 Grain Mill on stand #2905

Mixed mill KT-130

The machine only operates when the pedal is pressed

The machine requires at least 32A


Spare Parts Bandsågsblad TRIPAS JUNIOR 12,5x2280 #10900

Bandsaw blade TRIPAS JUNIOR 12.5x2280 #10900

Band saw blade TRIPAS JUNIOR 12.5x2280


Width: 12.5mm

Length: 2280mm