Categories
Vemag HP20E -2017 and Vemag BC236 -2017 (1861 hours) #2908
Vacuum filler with portioner.
Very little used.
Previously used for meatballs.
Tools: 6 pcs, 58mm and 12 pcs, 28mm
Working time: 1861 hours
ABELE Burn and scrape #2823
New bearings and seals in engine/transmission. New bearings and seals in the distribution gearbox. New bearings and seals + paddles in rollers. New wheels. New thermostat. New on/off switches. New overrun/starting torque. New connection cable. New lock sensor. New sealing strip for electrical cabinet.
Refrigerator Porkka C520 #2892
External dimensions: Width 60cm, Depth 69cm, Height 203cm
Inner dimensions: Width 48 cm, Depth 55 cm, Height 143 cm
Number of shelves: 4
Shelf dimensions: Width 53cm, Depth 38cm
Electrical connection: 230V
The door list looks a bit dull but closes tightly and works
Sveba Dahlen C-150 Stickugn #2906
New solenoid valve, filter, and copper water inlet line,
New axle coupling between motor and shaft for roof valve,
Missing insulation plate under the machine.
Cart with outer dimensions approximately: width 500mm, depth 600mm and height 1800mm.
Damper, heater and humidifier operate.
Worn state on the floor inside and a bit battered exterior otherwise in good condition!
Krymptunnel Smipack T652/23 #2904
A nice Krymptunnel from Smipack
Year model 2023
Works as it should
Other information:
Max product height: 300mm
Conveyor belt speed: 2 to 14.5 m/min
Max heat: 200c
Dimensions: (L × W × H): 1910 × 1045 × 1565 mm
32A contact
KT-130 Grain Mill on stand #2905
Mixed mill KT-130
The machine only operates when the pedal is pressed
The machine requires at least 32A
Gear head Dynema Glomek SD180 #2866
New coating in the funnel
Lubricated according to the schedule
New button grommets
New oil
Customer must set the desired oil amount for the product, see attached manual
Works as it should
Conveyor belt Frontmatec MITB #2902
Very nice conveyor belt from Frontmatec
Roll 99x320cm
Height 130-141cm
Total width 129cm
Long cord
New switch
New 16A socket
Cooking Fribergs Panocopter PC 10(steam) #2900
New lock cover, pot.
New locking handle for whisk.
New safety switches both covers.
New position indicators for tilting tower.
Renovation 2 pcs solenoid valves.
Repaired reinforced whisk attachment.
New manometer high pot.
General inspection.
Tested without steam.
The machine needs 16A
Lift Mjölby – The Lift #2901
Fully functional lift from Mjölby
Max 120Kg
The hoist requires 16A
Degrullare Glimek CR-21 #2897
Field repair paint
Very long electrical cable
The machine requires 16A
Cutting machine Berkel 834 EPB Stacker #2899
Works fine! The LED indicator lights flicker a bit under the panel but it does not affect the function in any way.
(Must be set to 0 thickness followed by pressing the 'C' button for the table to return to its original position before the machine can be used.)