Chamber dimensions: 320x890x100 mm Machine Dimension: 480x1066x970 mm Welding beam: 2x310 or 1x310+1x920 mm Vacuum pump: 063 m3/h Machine Cycle: 10-20 sec. Power: 1.5-2.4 kW Weight: 219 kg

Chambers Dimensions: 520x500x200mm Machine Dimension: 785x700x1100mm Welding beam: 2 x 505 mm Vacuum pump: 063 m3/h Machine Cycle: 12-30 sec. Power: 1.8-2.4 kW Weight 183kg

Chambers Dimensions: 510x760x200mm Machine Dimensions: 790x900x1100 Welding beam: 795mm (front) / 480mm (right) Vacuum pump: 100 m3/h Machine Cycle: 13-26 sec Power: 2.3-3.4 kW Weight: 245kg

Combs Dimensions: 620x1050x280mm Machine Dimension: 947x1200x1150mm Welding beam: 1050mm (front) / 620mm (right) Vacuum pump: 100/160 m3 / h Machine Cycle: 15-40 sec. Power: 3.0 - 9.0 kW

Chamber dimensions: 400x620x240mm Machine Dimension: 820x1490x1345mm Welding beams: 2 x 620 mm Vacuum pump: 63 m3/h Machine Cycle: 13-33 sec Power: 2.1-3.2 kW Weight: 310 kg

Test run, works well.

Capacity: Equipped with 3 to 4 baskets/skewers, providing a capacity of approximately 9–12 chickens per grill cycle (depending on the size of the chickens).

Prescoring model (Dual Access): Glass doors on both the front and back. This allows staff to refill raw chicken from the kitchen side and the customer or store staff to pick out pre-grilled chicken from the front side.

New back trolleys/tax trolleys stainless

For standard char belts 60x40cm

Other information:

The Brokelmann trailer is made of stainless steel

which makes it suitable for industrial environments where equipment requires regular cleaning

and high hygienic requirements.

EURO E2 drawer-type transport cart is designed for comfortable internal transport

of standard EURO containers with an footprint of 600×400 mm. It offers a simple

solution to move boxes between production areas, cold rooms, warehouse, processing lines

and delivery zones.

Are you looking for back carts/tax carts in ABS plastic? Then you will find them here:

https://www.andersbrolin.se/annonser/829655-nya-backvagnar-taxvagnar-60x40cm-10698

We also have plastic crates that you can find here:

https://www.andersbrolin.se/annonser/6546165-ovrigt-plastbackar-60x40cm-9241

If you would like more information, contact us

Offered with or without control cabinet and transformer.

Replace front bearing

Replace p-box motor

Mesta el utbytt

Renovered tensioner

Front cover could not be repaired; lock switch.

High capacity: Engineered to withstand continuous chopping with a capacity of up to 180 animal bodies per hour.

Simple cleaning: The saw has fully opening doors and smooth surfaces in the enclosure to facilitate cleaning and maintain strict hygiene requirements.

Lubrication system: The machine is equipped with a drive system located in an oil lubrication bath, which reduces wear and minimizes downtime.

More information can be found in this (PDF):

https://neust.com.co/wp-content/uploads/2020/06/Sierra-de-Canal-JARVIS-modelo-Buster-V..pdf

Tank: 25 liters, internally powder-coated

Power output: 0.44 kW (0.6 HP)

Maximum pressure: 8 bar (approximately 116–120 psi)

Air flow (at 8 bar): Approximately 38 liters/min at 50 Hz (or 44 liters/min at 60 Hz)

Technology: Oil-free piston compressor (rocking piston), which guarantees that the air is completely free of oil particles.

Operating cycle: 100 % (approved for continuous operation).

Manual can be found here:

https://www.scribd.com/document/444144082/Jun-Air-%D1%80%D1%83%D0%BA%D0%BE%D0%B2%D0%BE%D0%B4%D1%81%D1%82%D0%B2%D0%BE

Forged hook is a little stronger

Test run and adjusted welding times

Works well

Pipe size: 156mm

Welding width: 25cm

Front end knife missing, sensor triggered

Capacity: The machine is designed to operate at speeds of up to 50 bags per minute according to the specifications, although in practice it often runs at a lower, more stable pace (around 20–30 bags/min) depending on the properties of the product.

Drive and mechanics: The construction is largely made of stainless steel to meet high hygiene requirements. The machine's weld backs and foil advance are driven by servo motors, while the other mechanical functions are controlled using pneumatics (compressed air).