Repairs, air valves and leaking hoses.

Adjusted magnet for safety switch.

Tested manually non-opinionated

Nice condition, no remarks.

Tested and works well. The screen flickers a little, but works great.

Replace air distributor Replace welding tape Change the oil Fixed connectors for pinch protection Double weld + cut off

New air hoses, New air bellows, New Teflon tape, Changed the order of the belts, 2 new potentiometers, Changed the input air pressure regulator, New oil in the vacuum pump, New silicone strips under the welding beams, 1 new switch for emergency stop, Renovated/cleaned vacuum and pressure valve.

Cleaned the pump and serviced Works fine
Mould: 250x140mm

Directed upper part. Refurbished plastic roller. Change the main switch. Adjusted circuit board for buttons. Change cover gasket. Change oil+filter in vac pump. Tool: 210x140mm

Change oil, filter in vac pump. Adjusted tool. Straighten the big tool. Adjusted Weld plastic brake. Change a vacuum hose. Tool fabric: 260x160mm, 190x135mm

Seems to work fine, we haven't tested with paper trays

New potentiometer for speed control. Cleaned and adjusted air valves. Printer responds and runs but lacks ink. No vacuum, machine is used running on food grade gas. Tools: 195x150, 225x155 (oval), 230x190mm

Changed oil and oil filter. New locking mechanisms (x2) for the hatch to the engine compartment, 1 better used welding beam (modified), New welding wires and tape on the welding beams, New connectors to the welding beam New rubber seal for the lid, New screen part, Aligned the lid, Changed tires,

Mounted cutoff on-off Replace main power switch Renovated welding beam The machine runs with an external vacuum pump or central vacuum (pump not included, can be purchased separately) Welding beam: 80x70cm The conveyor belt is included