New air hoses, New air bellows, New Teflon tape, Changed the order of the belts, 2 new potentiometers, Changed the input air pressure regulator, New oil in the vacuum pump, New silicone strips under the welding beams, 1 new switch for emergency stop, Renovated/cleaned vacuum and pressure valve.

Adjusted compressed air sensor. Installed new pressure gauge. Installed a new position sensor. Made a new protective plate underneath. Made a new protective plexiglass on top.

Seems to work fine, we haven't tested with paper trays

Welded and milled arms for the counterweights and arranged locking mechanism for the axles, Sealed all possible sources of leakage with silicone and welded crack in the table. Vacuum value: 6-7mbar both sides

Heating plate OK

Heating plate OK

Change oil and filter Welding beam renovated

Test run OK

Change oil, filter in vac pump. Adjusted tool. Straighten the big tool. Adjusted Weld plastic brake. Change a vacuum hose. Tool fabric: 260x160mm, 190x135mm

Mounted cutoff on-off Replace main power switch Renovated welding beam The machine runs with an external vacuum pump or central vacuum (pump not included, can be purchased separately) Welding beam: 80x70cm The conveyor belt is included

Test run OK