Anders Brolin AB
Din leverantör av nya och begagnade Charkmaskiner
Senaste i Lager

Sveba Dahlén C-150 -2017 #2943
New bearing for the fan.
New water inlet and replacement of solenoid valve.
Very dents and damage on the plates, but works very well!
Max oven temperature: 300°C
Max forklift mast height (Platform): 1815 mm
Max fork carriage height (Stroke): 1640 mm
Max diagonal dimensions on rail cart: 935 mm
Max sheet metal size: Up to 457 x 762 mm
Maximum load rear chamber: Standard 150 kg
You can find the brochure here (PDF):
If you have more questions, don't hesitate to contact us

Tub tipper 100cm # 1728
Complete renovation Replace a beam 100x40 Repacked piston plus painted up Built new bracket hydraulic pump Manufactured protection for pump Fitted adjustable feet Container dimensions: 85x109cm, height 92cm Total dimensions: 145x175cm, height 220cm

Conveyor belt 155x45cm #2211
Test run OK

Tipper Danfotech 100x75cm #2108
Newly painted hydraulic tank and engine Tub width: 100cm Tub depth: 75cm Lifting height: 110cm

Henneken Tumbler 1500 liters #1959
Fixed the hatch New tensioner for the hatch The machine uses central vacuum and central cooling. Vacuum and cooling chamber pressure tested and are tight.

Cutting machine Scharfen VA-3001 T #1793
Test run OK
Fully automatic stapling/placing: The machine slices the product and automatically places the slices in neat rows, stacks, or circular patterns (shingling/stacking) on a receiving table.
Material: Built in 100% robust, food-grade stainless steel for maximum hygiene and long service life.
Capacity & Precision: The machine operates with reduced return stroke which maximizes the number of discs per minute, while stepless adjustment guarantees exact disc thickness without waste.

Blastchiller Electrolux Air o Chill #2315
Test run OK
Capacity: Holds 6 GN 1/1 containers.
Performance (Coolant cooling): Cool 30 kg of food from +90 °C to +3 °C core temperature in under 90 minutes.
Performance (Frost/Freezing): Freeze 25 kg of food from +90 °C to -18 °C in less than four hours.
Material: The entire inner and outer structure is made of high-quality stainless steel.
More information can be read here (PDF):

Trolley lift 135-185cm #2344
Rep circuit board in frequency converter. Built brackets and fixed electrical cabinet. New feeder cable ATTENTION! After a power failure, the lift must be reset with an emergency stop. And you should drive at low speed towards the end positions. Two speeds. Works perfectly

Lift 2003 Industrilyften IL 100 P # 1737
Test run OK 100kg capacity jaws: 60x40cm

AE Audion Electro Tray sealer #9225
Description Year model 2005 A tool for 2 pcs 195×125 troughs 230 volt 16 amp 2000w
Only Gas

Smoking cabinet for liquid smoke Protech #10661
Smoke cabinet from Protech. Runs with liquid smoke

Salt injector Fomaco 20 needles #10510
Model: FGM 20/80 F 1.1 kW
Tick rate/Speed: Adjustable needle speed, usually between 15 and 65 strokes per minute depending on product and desired injection volume
Conveyor/Bandwidth: The conveyor belt is 280 mm wide (designed for smaller meat pieces or fish fillets). The belt is driven in full synchronization with the needle stroke movement
Number of needles: 20 pieces mounted on a needle bridge (single-needle configuration).
Lift 60x40 #1360
Capacity: 100kg Tray: 60x40cm Lifting height approx: 65cm Air pressure: 6bar

Smoke generator Doleschal #2495
Electric motor test run
Glow coil not tested
Other information:
Main components: The generator is built around three mechanical main units: a fan/circulation fan, a feed screw (screw), and a heating element/glow coil.
Function: The methanizer transports the smoke material automatically (usually chips or sawdust) to the fire bed. The heating element ignites the material and the fan disseminates the smoke development further into the smoke chamber.
Material: The chassis and all internal mechanical parts are made entirely of high-quality, food-grade stainless steel.

Twist Linker Mainca PR 250 #2493
New seal for the rotating shaft.
The machine is used only for fine emulsion. Not coarse sausage like beer sausage or similar.
Capacity: Up to around 60 portions per minute (equivalent to production of up to about 250 kg/h).
Portion size: Adjustable from about 20 to 215 grams.
Power connection: 230V
Flexibility: Works perfectly with most types of grease/sealant. It is controlled either via foot pedal or entirely automatically with an adjustable speed.

Kotletthugg Treif Puma CE Model D-57641 #2843
Works fine
DESCRIPTION
TREIF PUMA-CE is a meat cutting machine for cutting foods such as meat, sausage, cheese or fish. – The lowest permissible temperature for the material to be cut must not drop below -4 °C. - Maximum feed dimensions: 220 x 240 mm - Length of the conveyor belt: 1.55 m - Conveyor belt width: 0.24 m - Cut length: * With single blade: 0–70 mm * With double blade: 0–35 mm This model has automatic start and two different functions: - To feed forward short products to be cut to the knife compartment, to reduce processing time. - To cut pieces of various sizes. For example: a piece of ribs. It is a continuous process; the conveyor belt starts to roll at the set speed as soon as the main start button is activated. Production may vary depending on which product is to be cut.

Spice blender S28 #2499
Test run works fine
Capacity: About 28 liters
Material: 100 % high-quality stainless steel for optimal hygiene and easy cleaning.
Construction without moving parts internally: The entire drum moves, eliminating hidden corners or paddles where bacteria and food residues can accumulate.
Applications: Mixing of dry spices, marinating, and rubbing of meat, poultry, or fish.

Root fruit lift #2659
test run Works well

Handpackaging machine Teraoka (Digi) Hand Packer SA-11 #2637
Test run OK
Function: The machine holds a roll of stretch film, has a heated cutting wire/knife to cut the film and an integrated heating plate (weld plate) at the bottom that fuses the plastic on the underside of the plate for a tight seal.
Dimensions: 470 mm (Length) x 585 mm (Width) x 140 mm (Height).
Weight: Approximately 7 kg.
Power supply: 220V / 200W.
You can find the brochure here (PDF):
https://www.banhing.com/wp-content/uploads/2016/05/SA-11-HAND-WRAPPER.pdf

Rational oven CD201 -1999 #2638
Test run works.
No steam.
Other information:
Capacity: 20 × GN 1/1
Warm air:30 °C to 300 °C
cooldown (Cool Down): Function to quickly cool down the oven cavity using the fan
Water connection:R 3/4"
Water pressure:1.5 – 6 bar
Sewer connection:DN 50 mm

Oven Rational Combimaster #2623
New door list
Works fine!
Other information:
Steaming: (30 °C–130 °C)
Warm air: (30 °C–300 °C)
Combination: (30 °C–300 °C)
Manual can be found here:
https://www.bruksanvisni.ng/rational/combimaster/bruksanvisning

Rational oven MCM 61 -2008 #2705
Test run, in good condition!
Combination (30°C–300°C): Mixing of dry hot air and steam which prevents the raw materials from drying out and gives a crispy surface.
Forced air (30°C–300°C): Powerful circulation for frying, grilling and baking.
Steam cooking (30°C–130°C): High-performance steam generator for gentle cooking of vegetables and fish.
Capacity: 6 x GN 1/1-blank. Excellent for operations that serve about 30–80 portions per day.
Power: 10 kW

Dishwasher Metos Lux 60 EL -2013 #2589
Test run works fine
Pipe size: 500 x 500 mm
Tank volume: 17 liter
Boiler capacity: 5.7 liters
Sound level: About 62–63 dB(A) thanks to double-wall insulation
Manual:
https://www.metos.se/o/commerce-media/accounts/-1/attachments/146982394?download=true

Rühle SR 1 Dice Machine #2699
Mounted contactors
Replace magnet with knife lid
Tool: 6mm
Worked fine!
Capacity: Up to 900–1,500 kg/hour (depending on product and feed) with about 80 cuts per minute.
Loading chamber: Approximately 330–350 x 100 x 100 mm.
Construction & Weight: Substantial machine in stainless steel
The interior space where you place the product to be cut has the dimensions:
Length:350 mm
Width:100 mm
Height:100 mm
A video that shows the function:
https://www.youtube.com/watch?v=Sn6d3rya1to
Manual can be found here on this page.
https://www.manualslib.com/manual/1762505/Ruhle-Sr-1-Turbo.html

Cutter Berkel 834EPB STACKER -1998 #2741
Berkel 834EPB STACKER
Works as it should
Blade: Mounted and precision-ground blade with a diameter of 300 mm.
Capacity: Can cut anything from leaf-thin slices up to 5 mm thick.
Automation: Equipped with an built-in dethatcher? actually avläggare means device that lays down? In Swedish,
You can find the brochure here (PDF):
https://dekoholland.com/img/pdfbestanden/445227/English_Safe_834_EPB.pdf

Meat tumbler SFK-Danfotech MA8001 #2743
SFK-Danfotech MA8001
New starter motor hood
New vacuum gauge
Please watch the video
For more information contact us
Other information:
Osmotic massage: The machine uses vacuum and internal carrier heads (scrapers) to massage the meat. This makes brine and spices absorb evenly, while the meat proteins bond better and moisture loss is minimized.
Versatility: It is used for both whole muscle cuts and smaller pieces of meat, regardless of whether the meat has been injected with brine or air-salted.
Total drum volume:8,000 liters
Maximum fill amount (Meat massage): At a recommended fill level of about 60%, the machine can accommodate up to 4,800 kg of meat per batch.
Maximum fill amount (Tining): If the machine is used for thawing frozen blocks, the fill level is about 35–40%, which corresponds to approximately 3,200 kg

Blending mixer La Minerva C/E701 -2002 #2756
New packing boxes
New gasket between machine and tub
Works fine
Kvarnhus 98mm, 2 blades
Kvarnsats: Equipped with a 98 mm spindle attachment.
Capacity: The grinding capacity is around 800 kg per hour.
Motors: The machine is powered by two independent motors (one for the milling screw and one for the mixing vane). This allows you to run only the mixing function before starting the actual grinding.
Construction: Chassis, trough and milling housing are made of stainless steel (AISI 304) for maximum hygiene and easy cleaning. The machine is on wheels for easy mobility during cleaning

Band saw KT 400 #2790
New thumb guard
New saw blade
New blade guard
Better start scraper

Cutting machine Bizerba SE 12 D #2802
New (beg) locking handle for the carriage,
Adjusted blade guard
Kling diameter: 330 chrome-plated hard alloy.
Clutch speed: 266 RPM (rpm).
Sheet thickness: Steplessly adjustable from 0 to 24 mm.
Max product size (Round): Up to 203 mm in diameter.
Max product size (Rectangular): 295 x 163 mm.
Operating modes: Fully automatic (motor-driven carriage) or manual feeding.
Brochure can be downloaded here (PDF):


