New bearing for the fan.

New water inlet and replacement of solenoid valve.

Very dents and damage on the plates, but works very well!

Max oven temperature: 300°C

Max forklift mast height (Platform): 1815 mm

Max fork carriage height (Stroke): 1640 mm

Max diagonal dimensions on rail cart: 935 mm

Max sheet metal size: Up to 457 x 762 mm

Maximum load rear chamber: Standard 150 kg

You can find the brochure here (PDF):

https://www.sveba-dahlen.se/sites/default/files/2022-10/stickugn-c-serien-broschyr-sveba-dahlen_0.pdf

If you have more questions, don't hesitate to contact us

Newly painted hydraulic tank and engine Tub width: 100cm Tub depth: 75cm Lifting height: 110cm

Change the emergency stop Review Works well Max product height 10cm

New band test run works Must be calibrated when installing detecttronic technician Product height Max 14cm

Test run OK

Rep circuit board in frequency converter. Built brackets and fixed electrical cabinet. New feeder cable ATTENTION! After a power failure, the lift must be reset with an emergency stop. And you should drive at low speed towards the end positions. Two speeds. Works perfectly

Test run OK

Capacity: Holds 6 GN 1/1 containers.

Performance (Coolant cooling): Cool 30 kg of food from +90 °C to +3 °C core temperature in under 90 minutes.

Performance (Frost/Freezing): Freeze 25 kg of food from +90 °C to -18 °C in less than four hours.

Material: The entire inner and outer structure is made of high-quality stainless steel.

More information can be read here (PDF):

https://7daychef.com/products/specs/HDBB010.pdf?srsltid=AU7gw4UY3mBnKgTxCYPDxCPvx218xwdoXaocjhf1pZks7IcoDvlFLDTN

Cleaned the pump and serviced it

Works fine

Tool: 250x140mm

Capacity: Up to 3–6 cycles per minute (depends on vacuum level, gas handling and operator speed).

Maximum film width: 450 mm

Maximum tray size (1-compartment): Approximately 325 × 265 mm

Complete renovation Replace a beam 100x40 Repacked piston plus painted up Built new bracket hydraulic pump Manufactured protection for pump Fitted adjustable feet Container dimensions: 85x109cm, height 92cm Total dimensions: 145x175cm, height 220cm

Test run OK 100kg capacity jaws: 60x40cm

Capacity: 100kg Tray: 60x40cm Lifting height approx: 65cm Air pressure: 6bar

Description Year model 2005 A tool for 2 pcs 195×125 troughs 230 volt 16 amp 2000w

Only Gas

Fixed the hatch New tensioner for the hatch The machine uses central vacuum and central cooling. Vacuum and cooling chamber pressure tested and are tight.

Refurbished feed screw, new bearing bottom part plastic New seals lids and hatches Repaired band New button covers -No vibrator

Refurbished lifting device for cleaning. Measured and checked the condition of heating rods, 7pcs heating rods replaced with new. Power heating rods: 4500 watts x12 Dimensions: 530x150cm Belt: 60cm Internal measurement for product: 400x60cm. Adjustable belt speed.

With oil container 1100liter
Electric cartridges, thermostat and float tested, work well.

Outer dimensions: 230x110cm, height 195cm

Test run and adjusted welding times

Works well

Pipe size: 156mm

Welding width: 25cm

Front end knife missing, sensor triggered

Capacity: The machine is designed to operate at speeds of up to 50 bags per minute according to the specifications, although in practice it often runs at a lower, more stable pace (around 20–30 bags/min) depending on the properties of the product.

Drive and mechanics: The construction is largely made of stainless steel to meet high hygiene requirements. The machine's weld backs and foil advance are driven by servo motors, while the other mechanical functions are controlled using pneumatics (compressed air).

Test run OK

Fully automatic stapling/placing: The machine slices the product and automatically places the slices in neat rows, stacks, or circular patterns (shingling/stacking) on a receiving table.

Material: Built in 100% robust, food-grade stainless steel for maximum hygiene and long service life.

Capacity & Precision: The machine operates with reduced return stroke which maximizes the number of discs per minute, while stepless adjustment guarantees exact disc thickness without waste.

New seal for the rotating shaft.

The machine is used only for fine emulsion. Not coarse sausage like beer sausage or similar.

Capacity: Up to around 60 portions per minute (equivalent to production of up to about 250 kg/h).

Portion size: Adjustable from about 20 to 215 grams.

Power connection: 230V

Flexibility: Works perfectly with most types of grease/sealant. It is controlled either via foot pedal or entirely automatically with an adjustable speed.

Test run works fine

Capacity: About 28 liters

Material: 100 % high-quality stainless steel for optimal hygiene and easy cleaning.

Construction without moving parts internally: The entire drum moves, eliminating hidden corners or paddles where bacteria and food residues can accumulate.

Applications: Mixing of dry spices, marinating, and rubbing of meat, poultry, or fish.

Welded and milled arms for the counterweights and arranged locking mechanism for the axles, Sealed all possible sources of leakage with silicone and welded crack in the table. Vacuum value: 6-7mbar both sides

Test run runs quietly and smoothly

Capacity: Capable of grinding about 800–950 kg per hour depending on the final disc.

Knife system: Equipped with Unger B98 system (5 parts) with a clearance wheel of 98 mm.

Trattvolym: Has a large feed hopper/bowl of 45 liters.

Power Powerful industrial motor at 2.9 kW.

Manufactured missing pressing tools

Replace a button

Corrosion-protected various interior

Welded feet.

Capacity: Depending on the product and configuration, the hydraulic press operates at an efficiency of about 6–12 cycles per minute.

Chamber & Product Size: The machine's forming tool provides a standardized product size of 300x200 mm with adjustable height.

Material: Designed in stainless steel and acid-resistant elements to meet strict hygiene requirements and withstand tough cleaning procedures in meat processing environments.

New scrapers x3

New blade

New plastic wheel

New support bearing

New blade pin

New bearings for the table x2

New blade guard

New lock (empty)

New start button

Wheel for table

Mounted emergency stop

The door list looks a bit dull but closes tightly and works

Outer dimensions: Width 60cm, Depth 69cm, Height 203cm

Inner dimensions: Width 48cm, Depth 55cm, Height 143cm

Number of shelves: 4

Hyllmått: Width 53cm, Depth 38cm

The connection: 230V

More information is here (PDF):

https://scotsman.dk/wp-content/uploads/2021/11/Technical_data_Future_EN_201307.pdf

Getinge M3 Stock Pot

New ventilation packages

Year model 2009

Other information:

Heating principle: The pot is double-walled. The electric elements in the technical pillar heat water to steam in the jacket (the interspace), which provides an extremely even heat across the entire inner pot. This reduces the risk of sensitive ingredients such as milk, porridge or sauces burning.

Features: The panel handles the stepless or electronic temperature control, measurement of mantle pressure/temperature, as well as soft-start and autoreverse for the mixer (if the machine is equipped with a mixing tool).

New (beg) locking handle for the carriage,

Adjusted blade guard

Kling diameter: 330 chrome-plated hard alloy.

Clutch speed: 266 RPM (rpm).

Sheet thickness: Steplessly adjustable from 0 to 24 mm.

Max product size (Round): Up to 203 mm in diameter.

Max product size (Rectangular): 295 x 163 mm.

Operating modes: Fully automatic (motor-driven carriage) or manual feeding.

Brochure can be downloaded here (PDF):

https://www.google.com/goto?url=CAESdAHrOzAVB7gJKOh_2Ag1cW93--8nY1x8jdYxiwRMaj0MHupMmGaSs_6j9GosDpN5z1FWvJ-AKVdgTjvfzt63L39uJ94r28ZQeYULpVstGkIM2rX153URaLxTT34XNvKkzHxexgyrCB6B6ZvtioUyfgMiEGsG

Metos refrigerated well with refrigerator

Cools and regulates but takes time to reach the desired temperature

Lowest temperature +2°C

Note: Shows -3°C as it sits in a warehouse without heating 🥶❄️

Sold as is

Bench:

Length: 120mm

Width:650mm

Height:900mm

Container:

Length:1040mm

Wide:510mm

Depth:160mm

More information can be downloaded via this link (PDF):

https://www.metos.se/o/commerce-media/accounts/-1/attachments/138335863?download=true

A mixer from Italiana.

cuff volume:30 liter

Construction type: Machine with fixed bowl and fixed dough hook (not detachable). The construction makes the machine very stable for heavy doughs such as pizza dough and sourdough.

Speeds: Equipped with 2 speeds (low speed for mixing/embracing and high speed for kneading)

Emergency stop: Easily accessible, mechanical emergency stop button on the control panel.

If you have more questions, don't hesitate to contact us

Replace a button.

Cleaned and dried.

Works fine!

Capacity

max 3200 – min 1950 st/timme

max 4500 st/hour with the 3-axis version

max 1600 pcs/hour with single-row version

Weight range

20 – 75 g

25 – 85 g

30 – 95 g

35 – 105 g

40 – 110 g

50 – 120 g

The brochure is available at the link below (PDF):

https://trima.de/wp-content/uploads/2023/09/Brochure-Prima_Duo-EN.pdf

Link to more information can be found here:

https://trima.de/dough-dividers-and-rounders/prima-duo/

If you have more questions, don't hesitate to contact us