Cooking pot 100L #2808

Cooking pot at 100L, not double-walled. Functioning fine Requires 32A and good pressure in the water supply. Hot water disconnected. Please also watch the video

Is machine Porkka Migel KL302 #2949

Replace faulty hose and cleared obstruction that were in the system.

Masking machine operates without remark,

The ozone generator indicates that the UV lamp is starting to get old - but it still produces ozone.

Capacity: Produces up to 260 kg of ice per day (equivalent to about 14,440 homogeneous ice cubes).

Coolant: Environmentally friendly R290.

Spraysystem: The machine uses an advanced spray system that guarantees completely homogeneous, crystal-clear and hard ice cubes that slowly melt in drinks.

You can find the brochure here (PDF):

https://colia.se/wp-content/uploads/2021/02/3-Ismaskiner-bingar-och-istransporter.pdf

Dishwasher HOBART CN-L-A #2836

Replace heat exchanger

Replace fan motor.

Replace a water valve.

Tested, no faults.

Other information:

Cage size: 500x500 mm

Capacity: 3 speeds and can handle between 120 and 250 casserole baskets per hour (nominal max capacity up to 4,500 plates or 9,000 glasses per hour)

Brochure (PDF):

https://hospitalityequipmentonline.com.au/index.php?route=extension/module/document/download&filename=CN-L-A.pdf

Used Diskmaskin METOS KP402 E PLUS #2887

Dishwasher METOS KP402 E PLUS #2887

1 new level sensor

1 new pump house

Other information:

Overall dimensions: 1350x725 mm

Opening height of the hatch: 810 mm

Tank volume: 148 liter

Used Vemag HP20E -2017 and Vemag BC236 -2017 (1800 hours)

Vemag HP20E -2017 and Vemag BC236 -2017 (1861 hours) #2908

Vacuum filler with portioner.

Very little used.

Previously used for meatballs.

Tools: 6 pcs, 58mm and 12 pcs, 28mm

Working time: 1861 hours

Thermoformer Machine DIXIEVAC 2000 #2940

Thermoformer Machine from DIXIE

Some safety switches bypassed.

Longitudinal knives missing.

Some buttons out of function.

Some grippers are missing for the plastic.

Works quite okay for its age.

Information from the internet:

Capacity: Depending on the depth of the packaging and how quickly the vacuum pump can evacuate air, it usually operates at a rate of up to 10–16 strokes per minute

Film and gauge: Underfilm on 320 mm (effective weld/work width approx 296 mm). Overfilm 300–305 mm

Compressed airThe machine uses compressed air to shape the plastic in the tool and to raise/lower the welding plates. You need a compressor that can deliver a constant pressure of about 6 bar.

Other:

Includes a stand with accessories and documentation as well as a vacuum pump.

Mounted tool:

approximately 200x280mm