Washed conveyor belt.

Runs fine without any remarks.

Please watch the film.

Band length: 640x3000mm

Working width: 650 mm (maximum width of the dough that can be rolled).

Bandmaß: The belt total length is usually around 3,000 mm (approximately 640 x 3,000 mm distributed on both sides).

Cutting distance (Thickness): Infinitely adjustable between approximately 0.5 and 42 mm.

Bandhastighet: Up to about 40 meters per minute, which provides a fast and efficient flow.

In operating mode (extended belts): Length: approx. 365 cm (3650 mm)

Depth/Width: approximately 120 cm (1200 mm)

Height: approx. 140 cm (1400 mm)

If you have more questions, don't hesitate to contact us



Fimar rolling machine machine The unit works as it should; the model is most likely a FI32N

New bearings on intermediate shaft

Please watch the video

No protective grate (not approved)

Capacity (Kittel volume):100 liters.

Power output:2 kW.

speed control: Equipped with an electronic system for stepless speed variation.

Material: Heavy and solid construction in cast iron

New glove/contact

The review is done and works fine

Other information:

The machine has a diameter of 125 cm

Contact us for more information

Berkel 834EPB STACKER

Works as it should

Blade: Mounted and precision-ground blade with a diameter of 300 mm.

Capacity: Can cut anything from leaf-thin slices up to 5 mm thick.

Automation: Equipped with an built-in dethatcher? actually avläggare means device that lays down? In Swedish,

You can find the brochure here (PDF):

https://dekoholland.com/img/pdfbestanden/445227/English_Safe_834_EPB.pdf

Test run, works fine

Other information:

Dimensions (W×D×H):610 x 760 x 2100 mm

Material: Completely in stainless steel sheet, both exterior and interior.

Temperature range: -1 °C to +12 °C.

Hyllmått: Compatible with shelves of size 450 x 500 mm.

Connection: 220–240V, 1-phase (50/60 Hz)

You can find the brochure here (PDF):

https://kylcity.se/wp-content/uploads/2017/05/ck400_ck500_ck550.pdf

Replace surrounded in air distributor

Replace grinding tape

Change oil

Fixed contacts for clamping guard

Double weld +cut off

Welding beams 90cm (2 pcs), 60cm

New air hoses, New air bellows, New Teflon tape, Changed the order of the belts, 2 new potentiometers, Changed the input air pressure regulator, New oil in the vacuum pump, New silicone strips under the welding beams, 1 new switch for emergency stop, Renovated/cleaned vacuum and pressure valve.

Mounted contactors

Replace magnet with knife lid

Tool: 6mm

Worked fine!

Capacity: Up to 900–1,500 kg/hour (depending on product and feed) with about 80 cuts per minute.

Loading chamber: Approximately 330–350 x 100 x 100 mm.

Construction & Weight: Substantial machine in stainless steel

The interior space where you place the product to be cut has the dimensions:

Length:350 mm

Width:100 mm

Height:100 mm

A video that shows the function:

https://www.youtube.com/watch?v=Sn6d3rya1to

Manual can be found here on this page.

https://www.manualslib.com/manual/1762505/Ruhle-Sr-1-Turbo.html

Test run works fine

Other information:

Max 6/15 kg: The scale weighs up to 6 kg with a precision of 2 g, and between 6 and 15 kg with a precision of 5 g.

My 40 g:

Contact us for more information.

All bearings and seals new for the rollers.

New radial seals on the gearbox.

New push-in buttons.

Replace feet.

Reinstalled a magnetic switch.

Note: The machine lacks switch for infeed and outfeed band (bypassed)

Material: Fully constructed in stainless steel for optimal hygiene and easy cleaning in food environments.

Function: Equipped with knife rollers that treat the meat to improve slice cohesion and reduced looser pockets.

Safety: Perforated metal guard on the top side that provides good visibility and ventilation but prevents contact with moving parts during operation.

Construction: Stable design with adjustable feet for leveling on uneven production floors.

Test run, very good condition!

Cutting width: 430 mm

Cutting speed: 24 meters per minute

Capacity & Function: Equipped with an input belt for automatic operation, but can also be switched to manual "open" mode for round parts.

Construction: Completely in stainless steel with wheels for easy movement. Designed without hidden corners ("blind spots") to meet strict hygiene requirements and facilitate cleaning.

Cutting thickness: Steplessly adjustable knife gap depending on configuration (often between 0.5–8 mm or up to 4–12 mm for charcuterie details)

More information is available at the link below:

https://www.nock-gmbh.com/en/produkte/entschwartungsmaschinen/cortex-cb-496.php